Ortofon 2M Red series

Varenummer: Ortofon 2M Red series
Kategori:

Ortofon 2M Red series

kr0.00

1 på lager

  • Tilleggsinformasjon
  • Omtaler (0)
Vekt 0.00 kg

Omtaler

Det er ingen omtaler ennå.

Bli den første til å omtale “Ortofon 2M Red series”


Ortofon 2M Red, 2M Red Verso and 2M Red PnP

The Orotofon 2M logo

The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound

 

The name 2M was selected among several ideas. We wanted a modern name that would be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

The 2M series of cartridges feature Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.  

We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. 2M Series provides excellent compatibility in an assortment of playback systems and with a wide variety of phono preamps. To find the recommended Ortofon replacement cartridge for your turmtable/tonearm please visit our Replacement cartridges selector ».

 

2M Red Verso hifisite

The new 2M Red Verso is an alternative product for bottom mount tonearms

 

The 2M Red Series features:

  • an improved engine, which provides an increased output of 5.5mV
  • a tipped Elliptical diamond and split pole pins with a copper wire

 

2M Red Plug and Play model

The new 2M headshell is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their tonearm. The combination of 2M Headshell and 2M Series cartridge adds unique distinction to the turntable!

 

2M-Red PnP2M Headshell features:

  • Universal mount fitting a wide range of tonearms. NB: on Technics models please use the auxiliary weight which is vital in this case. 
  • The headshell body is manufactured from a special compound used for Medical industry, ensures high rigidity while reducing unwanted vibration
  • Elegant hi-tech design
  • Length 52mm. Headshell with a 2M cartridge pre-mounted provides correct Baerwald alignment with Ortofon TA-110/210, likewise with the major part of tonearms with universal mount   
  • Weight 16,9g, weight with a 2M cartridge pre-mounted 23g
  • Exclusive plug-and-play solution

 

NB: The 2M headshell will be available in 2M PnP configuration (2M cartridge pre-mounted on the 2M headshell)

   

Technical data 2M Red / 2M Red Verso

 
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz  1,5 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at – 3dB 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / – 1 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Red
Cartridge weight 7,2 g
Replacement stylus unit 2M Red (interchangeable with 2M Blue)
Stylus protection guard 2M Red
   

2M Red accessories included the package:

 

2M Red Verso accessories included the package:

  • 1 x Stylus brush
  • 1 x Screwdriver
  • 2 x Screw M2,5 x 5
  • 2 x Screw M2,5 x 7
 
  • 1 x Stylus brush
  • 1 x Allen key Torx 6
  • 1 x Allen key Torx 8
  • 2 x Screw M2,0 x 6

 

 

 

   

How to replace M2,0 mm screws on 2M Red Verso

  • Remove the stylus with the stylus protection guard from the cartridge body to avoid any damage to the diamond
  • Using Torx 8 key, unscrew the black screw from the Verso top plate
  • Remove the top plate from the cartridge body by pulling the screws off
  • Remove the two countersunk screws from the top plate
  • Insert the two M2,0 mm screws in the top plate
  • Mount the top plate on the cartridge body. Hold the top plate with screw-threads hanging down and turn the cartridge body 180 degrees. Mount from above
  • Mount the black screw in the top plate and tighten with appropriate force
  • Mount the cartridge on the tonearm using the enclosed tool
  • Mount the stylus with the stylus protection guard on the cartridge body

 

Download 2M Series new brochure here >>

Download 2M and 2M Verso Series Userguide here >>